DiamaShine Burnisher

The DiamaShine® Burnisher is the only machine engineered for wet-burnishing concrete floors with diamond-impregnated pads (DIPs). By eliminating airborne dust and extending pad life, this dual-capability unit excels at both wet polishing and dry burnishing. Unlike heavy grinders that can strip away the durable, hard-troweled surface skin, the DiamaShine Burnisher refines the concrete’s wear-resistant top layer. The result is a stunning 80-plus points of gloss in just three steps – delivering high-end clarity for a fraction of the traditional polishing cost.

The High-Gloss 3-Step Process

• Step 1: 800 Grit (Wet) for deep surface refinement.
• Step 2: 1500 Grit (Wet) to close the pores and build foundational clarity.
• Step 3: 3000 Grit (Damp-to-Dry) paired with a spray buff to make the gloss pop.
• Pro Tip: Start with 400 grit (wet) for extra clarity, or finish with a final dry 3000 grit pass for maximum mirror reflection.

Features:

• Working Width: 27 inches
• Pad Size: 27 inches
• Pad Speed: 1200-2100 RPM
• Engine: LX600 17 hp / 603cc propane
• Dimensions: Approximately 28 x 53 x 48 inches
• Weight: Approximately 165 lbs
• Dust Control: Floating shroud/skirt with an on-board dust collection bag and 2.5-inch vacuum port
• Emissions & Safety: On-board real-time emissions monitoring system and high-emission automatic shutdown device