SureLock Rejuvenating Cleaner | Crete Eater | Slurry Separator |
Slurry Dry | Citra Kut II | Crete Cleaner |
Acetone | Bio-Clean Ready | FGS Concrete Conditioner |
SureLock Rejuvenating Cleaner AmeriPolish – 5 gallons
SureLock Rejuvenating Cleaner makes concrete look young again. The concrete surface gets worn and scratched every day. Cleaning it with SureLock Rejuvenating Cleaner adds stain resistant back in where it’s been worn away. It helps the Stain Protector application do it job better so color isn’t damaged or lost. Rejuvenating Cleaner is part of the SureLock™ Color System designed specifically for coloring and polishing concrete floors. This product can also be used to gently clean concrete floors finished with products from other manufacturers.
Description:
- Bonds with the other SureLock Color Systems components
- Contains UV stabilizers to help protect against fading
- Contains reactive components that resist moisture and harmful chemicals to help protect against color damage, migration or dissipation
- Low-odor, non flammable and VOC compliant (< 40 g/l)
- Slip-resistant
- Superior clarity
- Excellent chemical resistance
- Won’t turn white even if it gets wet before fully curing
- Fast applying
- Ready for foot traffic within hours
- Enhances color depth and polish luster
- Apply with pump sprayer
- Approximate coverage 1,500 – 2,000 sq/ft per gallon
Crete-Eater™ – 1 gallon
The high pH, environmentally safe answer for replacing chlorinated and petroleum-based solvents. Crete-Eater is a 100% active, 100% biodegradable product that attacks and solubilizes a wide variety of greasy soils as well as most inks, adhesives and uncured polymers. This product rinses easily in water leaving behind a surface that is totally film free.
- High pH
- Environmentally safe
- 100% Biodegradable
- Works on a wide variety of soils
- Formulated for cleaning concrete
Download the product data sheet.
Slurry Separator Concrete Cleaner & Remover
Environmentally friendly way to deal with slurry and wastewater
Our proprietary blend of clay minerals, polymers and pH adjusting agents cleans wastewater through flocculation, precipitation and pH adjustment.
Slurry Separator gives contractors a fast-acting, one-step process for separating slurry into water and sludge, for safe and cost efficient clean up and disposal. The entire process is completed in just a few minutes, resulting in clear water that can be discharged directly to a Publicly Owned Treatment Works (POTW) or recycled. The sludge, and its encapsulated contaminants, are highly resistant to leaching and can be generally disposed of as a non-hazardous waste.
Benefits:
- Saves Money – Avoid the high cost of hauling/processing wastewater to be treated off-site
- Saves Time – Fast acting – entire process takes just a few minutes
- Meets guidelines for local, state and federal agencies
- Helps avoid long-term liabilities
- Streamlines operations – single application, treat on-site
Separates water from:
- Emulsified oils
- Heavy metals
- Phosphates
- Suspended solids
Item | |
Slurry Separator | 20 lb Box |
Slurry Separator | 50 lb Box |
Download the product data sheet.
Download the MSDS.
Slurry Dry Super Absorbent Polymer
Slurry Dry gives contractors a convenient way to contain water/slurry run-off on the job site, saving valuable time and helping to avoid costly clean up costs. Simply pour the super absorbent compound powder in the flow path of water and slurry to prevent it from reaching storm water drains, and other areas where it may cause stains or other damage. The compound absorbs 1,000 times its weight in water, converting it to a solid that can easily gathered and disposed of as a non-hazardous waste.
Benefits:
- Saves time by making clean up fast and easier
- Convenient – captures run-off as it is created
- Easier than using a vacuum system – just shovel and dump
- Meets guidelines for local, state and federal agencies
- Helps avoid long-term liabilities
- Eliminates staining and clean-up of surrounding area
- Protects environment from harmful run-off
Item | |
Slurry Dry | 20 lb Box |
Slurry Dry | 50 lb Box |
Download the product data sheet.
Download the MSDS.
Citra Kut II – 1 gallon
This powerful citrus based solvent quickly cuts through most concrete cure & seals, other concrete sealers, and carpet and tile adhesives. It will also remove heavy grease and oils, tar and asphalt.
This high-powered degreaser is a “ready-to-use” product. After the degreasing or cleaning procedure, it can be mixed with water to provide a water-rinsable cleaner.
Download the product data sheet.
Download the MSDS.
Crete Cleaner – 1 gallon
This alkaline surfactant cleaner is an environmentally safe answer for replacing chlorinated and petroleum-based solvents. Crete Cleaner is 100% active, 100% biodegradable product that attacks and solubilizes a wide variety of greasy soils as well as most inks, adhesives and uncured polymers. This product rinses easily in water, leaving behind a surface that is totally film free. Crete Cleaner is also safe for use on most metals.
Bio-Clean Ready – Ready To Use, Biodegradable, Citrus Based Concrete Floor Degreaser And Cleaner.
Use On New Or Existing Interior Or Exterior Concrete Floors.
Ideal For Warehouses, Distribution Centers, Manufacturing Plants, Automotive/Truck Repair Facilities, Food Processing Facilities And More.
BIO-CLEAN READY is a powerful, ready to use cleaner that deeply penetrates concrete floor surfaces to safely and effectively remove most surface contaminants.
- Fast Acting.
- 100% Biodegradable And Non-Toxic.
- Removes Dirt, Oil, Grease, Black Tire Marks, Bondbreaker And Curing Compound Residue And Carpet And Tile Adhesive.
- Pleasant Orange Scent.
FGS® CONCRETE CONDITIONER
Cleaner and Conditioner for Hardened, Polished Concrete Floors.
FGS Concrete Conditioner is a proprietary concrete cleaner and conditioner designed for on-going maintenance of hardened polished concrete surfaces. This product is highly concentrated and contains state-of-the-art wetting and emulsifying agents. FGS Concrete Conditioner is specifically manufactured to be used for maintenance of FGS PERMASHINE® Floors.
FGS Concrete Conditioner is a mild, concentrated cleaner that contains a measured amount of chemical densifier to aid in maintaining the gloss of your FGS PermaShine floor. In addition to economically cleaning your floor, regular use of FGS Concrete Conditioner will help to restore slight, microscopic wear, called micro-pitting, that accompanies normal floor usage. Many cleaners leave a slight residue that over time may compromise the non-slip nature of the floor. For safety assurances, FGS Concrete Conditioner has been formulated to rinse clean and not effect the slip profile of your floor.
Treated FGS PermaShine floors are certified by the National Floor Safety Institute as “High Traction”. This certification extends to polished concrete surfaces that have been treated with FGS Hardener Plus, and continues when maintained with FGS Concrete Conditioner. Floor safety is the number one concern of floor owners across the United States. Your use of FGS Products is an important part of a total safety program that provides floor safety to your company’s employees and customers. The use of most common cleaners may jeopardize the non-slip characteristics of your FGS PermaShine floor.
Features and Benefits:
- Maintains non-slip properties and appearance of FGS PermaShine floors with regular use.
- Designed for hardened polished floors.
- Portion controlled.
- Concentrated for economy
- Improves the durability of floor over time.
- USDA authorized.
- Environmentally safe
- National Floor Safety Institute (NFSI) certified “High Traction”.